Damen’s first Renewables Service Vessel 3315 launched

Damen’s first Renewables Service Vessel 3315 launched

Damen has launched the Renewables Service Vessel (RSV) 3315, a new type, which has been developed in close cooperation with Scottish company Delta Marine.

 

Damen’s first Renewables Service Vessel 3315 launchedOn the photo of the launching ceremony (1) from left to right:  Mrs. Mairi Spanswick (daughter of Mr. Bob Spanswick, Managing Director of Delta Marine Ltd.), her daughter Miss Akira Mary Lumsden (granddaughter of Mr. Bob Spanswick), Mr. Bob Spanswick (Managing Director of Delta Marine Ltd.)

Damen’s first Renewables Service Vessel 3315 launchedOn the photo of the launching ceremony (2) from left to right: Mr. Kommer Damen (Chairman, Damen Shipyards Group), Mr. René Berkvens (CEO, Damen Shipyards Group), Mr. Bob Spanswick (Managing Director, Delta Marine Ltd.

17 May 2017

Delta Marine’s Voe Vanguard sails straight into first project

Damen has launched the Renewables Service Vessel (RSV) 3315, a new type, which has been developed in close cooperation with Scottish company Delta Marine.

The first in the new series was officially christened Voe Vanguard at Damen Shipyards Hardinxveld by Miss Akira Mary Lumsden, the granddaughter of Bob Spanswick, Managing Director of Delta Marine Ltd. Just a week later Voe Vanguard was off to her first offshore wind farm, the Walney Extension project.

Delta Marine took delivery of its first Damen vessel 12 years ago and the Shetland-based company now has four Damen Multicat vessels in its fleet, as well as one it manages.

David McNaugthan, Delta Marine General Manager, says the decision to invest in a vessel specifically tailored for renewables was taken around four years ago. “We knew at Damen we get a good project and good quality backup.” 

The Damen RSV 3315 is based on the highly successful Multicat design. The vessel can undertake all duties normally expected of a Multicat but has the addition of a spacious, unobstructed deck, DP2 and dedicated 4-point mooring. The 33 metre vessel has a 42-tonne bollard pull.  “We were particularly interested in having a DP2 capability. This vessel is suitable for offshore wind but also for tidal projects, where she can stay in position using her DP in some pretty strong currents.”

Delta Marine and Damen adapted the traditional Multicat design by moving the wheelhouse forward and leaving the aft deck open. Additionally, it was important to make sure the vessel was under the 500-tonne mark to keep the costs down.

“The vessel is diesel electric, and has four azimuths, with a large stern thruster. She is also very flexible, with a shallow draught of only 2.6 m. The two aft azimuths can swing up into the hull and we can easily switch from DP1 to DP2 mode,” Mr McNaugthan points out.

In addition, Voe Vanguard has two powerful cranes, one of which has a capacity of 15 tonnes with an outreach of 20 metres. “With these we can carry and lift an awful lot for a wide variety of tasks.” She also has comfortable accommodation for up to 18 crew.

Mr McNaugthan outlines the potential of the Damen RSV 3315. “The DP2 system is very important for our clients, every single job is crying out for DP2. We are confident this new type will establish itself in the market.”

Voe Vanguard went off to work straight away for the Walney wind farm extension and then she will be exhibited at the Seawork in Southampton.  After that it is straight back up the coast for another project. “We already have work into August and beyond!” 

Jos van Woerkum, Managing Director of Damen Shipyards Hardinxveld comments: “We have been working on this vessel together since 2013. Delta Marine gave us a sketch and outlined their requirements and I think Damen has built exactly what they wanted. I always say we can do a lot if we do it together!

 “I think the Renewables Service Vessel 3315 has the potential to be the next success for Damen once she proves herself in the market. 

Damen Shipyards Group

Damen Shipyards Group operates 33 shipbuilding and repair yards, employing 9,000 people worldwide. Damen has delivered more than 6,000 vessels in more than 100 countries and delivers some 180 vessels annually to customers worldwide. Based on its unique, standardised ship-design concept Damen is able to guarantee consistent quality. 

Damen’s focus on standardisation, modular construction and keeping vessels in stock leads to short delivery times, low ‘total cost of ownership’, high resale values and reliable performance. Furthermore, Damen vessels are based on thorough R&D and proven technology. 

Damen offers a wide range of products, including tugs, workboats, naval and patrol vessels, high speed craft, cargo vessels, dredgers, vessels for the offshore industry, ferries, pontoons and superyachts.

For nearly all vessel types Damen offers a broad range of services, including maintenance, spare parts delivery, training and the transfer of (shipbuilding) know-how. Damen also offers a variety of marine components, such as nozzles, rudders, anchors, anchor chains and steel works. 

In addition to ship design and shipbuilding, Damen Shiprepair & Conversion has a worldwide network of 17 repair and conversion yards with dry docks ranging up to 420 x 80 metres. Conversion projects range from adapting vessels to today’s requirements and regulations to the complete conversion of large offshore structures. DSC completes around 1,350 repair and maintenance jobs annually.

  

For further information please contact

Ben Littler

Communications Advisor

31 (0) 183 65 5546

31 (0) 610 46 5742

ben.littler@damen.com

 

Ilona van der Zalm

Communications Advisor

31 (0) 183 65 4631

31 (0) 620 44 5648

ilona.van.der.zalm@damen.com

www.damen.com

 

 


Liked this post?

Please, give the poster some credit for his/her efforts.

Comments

No comments, yet

{{item.nick}}{{item.tstamp|unixtime}}{{item.credit}}

{{item.content}}

Login

Add Comment